Serviceline: + 49 (0) 89 / 452 455 217
Individual production
14 days right of return
0 0

Assembly instructions

Please ensure that the exterior temperature is not below 10°C. In temperatures above 30°C, attach the Velcro strip to the garage door first and wait 24 hours (instead of 30 minutes) before attaching the cover.

How it works: brief instructions

Scope of delivery
Your garage door cover includes a complete set with separate self-adhesive Velcro strips and can be attached immediately.

To assemble your garage door cover you will need:
  • approx. 30 - 60 minutes
  • tape or folding rule
  • felt-tip pen
  • scissors or carpet cutter
  • dry cleaning cloth and cleaning agent (e.g. spirit)
  • possibly a spirit level

Installation Video


Assembly for single and large garages

Unpack the design and measure the garage door
Lay out the tools for assembly
Clean the edges of the garage door
Trim the design to fit
Stick the fuzzy side of the Velcro to the back of the cover
Stick the hook side of the Velcro to the garage door
Attach the cover to the garage door
Mark the location of the garage door handle and cut it out
All done!

  Assembly instructions

Assembly for sectional doors

Clean the edges of the sectional door and measure the sections
Trim the design to fit
Attach additional hook Velcro to all edges of each section
Stick the fuzzy side of the Velcro to all edges of the back of the cover
Attach the trimmed covers to the sectional door
Mark the location of the garage door handle and cut it out
Attach the cover to each section one by one
When you open and close the door, neither the cover nor the door will be damaged
All done!

  Assembly instructions

Please note!

You yourself are responsible for attaching a garage billboard and any consequences that may be caused. We also ask for your understanding that we cannot accept returns of trimmed covers.

Before affixing the sticker, the wall surface should be dry and clean of all dirt and dust. (The wall should not have been painted any less than 3 - 4 weeks ago). When affixing larger designs, we recommend that 2 people do this.

How it works - quick start guide
To affix your wall sticker you will need::
  • Approx. 15 minutes
  • Folding metre stick or ruler
  • Pencil
  • Squeegee (optional)

Affixing to the wall

Mark the desired position of the design in two places.
Slowly peel away the first few centimetres of the backing film.
Apply the first few centimetres to the wall, along the markings you made.
You can use a squeegee to affix the sticker more easily.
Important: Make sure the corners of the design are firmly pressed down.
Now you can gradually peel away the backing film.
Apply pressure to the sticker bit by bit to fix it to the wall.
Double check that all corners and edges are smoothed down.

  Assembly instructions

Please note that the door billboards are designed for use only with smooth internal doors. Any kind of door material is suitable.

If you nonetheless wish to use the door billboard on an external door which is protected from the weather, we recommend that you seal the edges of the film (e.g. using transparent adhesive tape in order to protect the rear of the film from damp penetration.)

To fit your door billboard, you will need:
Around 15 - 30 minutes (plus 15 minutes waiting time), possibly someone to help you. A measuring tape or ruler, a felt pen, a cutter, cleaning agent, e.g. spirits dry cleaning cloth, screwdriver

Assembly for doors

Remove the door handle
Measure the internal door
Unpack and spread out the motif
Cut the motif and adhesive tape to size
Clean the edges of the internal door
Fix the adhesive tape to the door
Attach the door billboard to the internal door
Mark the position of the door handle and cut an aperture for it

  Assembly instructions